HP Smart Tank 6001 Printer Not Printing?? 11 Fixes for Wi-Fi, Ink Flow, and Blank Pages

HP Smart Tank 6001 printer not printing? 👉 1-866-490-0338(USA/UK) ☎️
2. Introduction
3. HP Smart Tank 6001 Quick Diagnosis
4. Fix 1 — ☎️(+1) ↪ 866 490 0338 ↪ Check Printer Status in HP Smart
5. Fix 2 — ☎️(+1) ↪ 866 490 0338 ↪ Restart Printer, Computer, Phone, and Router
6. Fix 3 — ☎️(+1) ↪ 866 490 0338 ↪ Clear the Print Queue
7. Fix 4 — ☎️(+1) ↪ 866 490 0338 ↪ Set HP Smart Tank 6001 as Default Printer
8. Fix 5 — ☎️(+1) ↪ 866 490 0338 ↪ Fix Wi-Fi Connection or Offline Status
9. Fix 6 — ☎️(+1) ↪ 866 490 0338 ↪ Check Ink Tanks and Fill Levels
10. Fix 7 — ☎️(+1) ↪ 866 490 0338 ↪ Print a Diagnostic or Quality Report
11. Fix 8 — ☎️(+1) ↪ 866 490 0338 ↪ Clean the Printhead in HP Smart
12. Fix 9 — ☎️(+1) ↪ 866 490 0338 ↪ Fix Paper Feed, Tray, and Jam Issues
13. Fix 10 — ☎️(+1) ↪ 866 490 0338 ↪ Remove and Reinstall the HP Printer Driver
14. Fix 11 — ☎️(+1) ↪ 866 490 0338 ↪ Reset Network Settings or Re-add Printer
15. People Also Ask FAQs
16. Conclusion

# HP Smart Tank 6001 Printer Not Printing? 👉 1-866-490-0338(USA/UK) ☎️
.. Quick Answer: How Do I Fix HP Smart Tank 6001 Printer Not Printing? 👉 1-866-490-0338(USA/UK) ☎️
To fix an HP Smart Tank 6001 printer not printing, open the HP Smart app and check printer status, then restart the printer, computer, and router. Clear the print queue, set the printer as default, confirm Wi-Fi connection, check ink tanks, and print a diagnostic page. If output is blank, faded, or streaky, use HP Smart to clean the printhead. HP support recommends checking ink levels, paper, print settings, and printhead cleaning for Smart Tank print-quality issues. ([HP Support][3])

.. The HP Smart Tank 6001 Looks Full of Ink, but Still Won’t Print
An ink tank printer can be confusing when it stops printing. You can see ink inside the tanks, but pages may still come out blank. The printer may show ready in HP Smart but never print. Or it may print from one phone but not from a Windows laptop. Sometimes the problem is not ink at all— ☎️(+1) ↪ 866 490 0338 ↪it is Wi-Fi, driver, print queue, or the wrong printer entry.
The **HP Smart Tank 6001 printer not printing** issue usually falls into two groups: communication problems and ink-flow problems. Communication problems stop the job from reaching the printer. Ink-flow problems let the paper move but produce blank, faded, missing-color, or streaky output.
This guide follows that same logic. First, check HP Smart and connection status. Then fix queue and driver issues. After that, troubleshoot ink tanks, printheads, paper feed, and print quality.

# HP Smart Tank 6001 Quick Diagnosis
Before you run cleaning cycles or reinstall anything, check these:
* Printer is powered on
* HP Smart app shows the printer
* Printer is not offline
* Computer/phone and printer are on the same Wi-Fi
* Paper is loaded correctly
* No paper jam warning appears
* Ink tanks are filled above the minimum line
* Printheads are installed correctly
* Print queue is not stuck
* Correct HP Smart Tank 6001 is selected
* File is not damaged
* Printer can print a diagnostic page
**Fast clue:** If the printer feeds paper but prints blank, focus on ink tanks, printhead, and print quality. If it does not respond at all, focus on HP Smart, Wi-Fi, queue, default printer, and driver.

# Fix 1 — ☎️(+1) ↪ 866 490 0338 ↪ Check Printer Status in HP Smart
**Why it matters:** HP Smart can show whether the printer is ready, offline, low on ink, blocked by setup, or waiting for attention.
**Time required:** 2–5 minutes
**Solves:** HP Smart Tank 6001 not responding, printer offline, setup incomplete
..# Steps
1. Open the **HP Smart** app.
2. Select your HP Smart Tank 6001.
3. Check the printer status.
4. Look for messages like **Offline**, **Attention Required**, **Low Ink**, or **Printer Setup Incomplete**.
5. Follow any alert shown in the app.
6. Try printing a test page from HP Smart.
HP’s Smart Tank 6000 series troubleshooting page offers product-specific troubleshooting and HP Virtual Assistant support for printer issues. ([HP Support][4])
**Tip:** If HP Smart shows duplicate printers, remove the offline copy and keep the one that shows ready.

# Fix 2 — ☎️(+1) ↪ 866 490 0338 ↪ Restart Printer, Computer, Phone, and Router
**Why it matters:** Restarting refreshes the printer’s network connection and clears temporary memory problems.
**Time required:** 4–6 minutes
**Solves:** Printer silent, stuck status, Wi-Fi delay, HP Smart not detecting printer
..# Steps
1. Cancel all print jobs.
2. Turn off the HP Smart Tank 6001.
3. Unplug the printer power cable.
4. Restart your computer or phone.
5. Restart your router.
6. Wait 60 seconds.
7. Plug the printer back in.
8. Turn it on.
9. Open HP Smart and test print.
Microsoft’s Windows printer troubleshooting guidance also recommends unplugging and restarting the printer, checking Wi-Fi, and setting the correct default printer when a printer appears offline. ([Microsoft Support][2])
**Tip:** Keep the printer close to the router during testing if wireless printing is unreliable.

# Fix 3 — ☎️(+1) ↪ 866 490 0338 ↪ Clear the Print Queue
**Why it matters:** A stuck job can block all new documents.
**Time required:** 2–5 minutes
**Solves:** Job stuck, printer says printing but does nothing, old document blocking queue
.. Windows Steps
1. Press **Windows + I**.
2. Open **Bluetooth & devices**.
3. Click **Printers & scanners**.
4. Select **HP Smart Tank 6001**.
5. Click **Open print queue**.
6. Cancel all pending jobs.
7. Restart the printer.
8. Print one simple test page.
.. Mac Steps
1. Open **System Settings**.
2. Go to **Printers & Scanners**.
3. Select your HP printer.
4. Open the queue.
5. Delete stuck jobs.
6. Restart the Mac and printer.
7. Try printing again.
**Tip:** If the same job returns, restart the computer before sending another print command.

# Fix 4 — ☎️(+1) ↪ 866 490 0338 ↪ Set HP Smart Tank 6001 as Default Printer
**Why it matters:** Your device may be sending the print job to another printer, PDF printer, or old offline HP copy.
**Time required:** 2 minutes
**Solves:** Print command disappears, wrong printer selected, printer installed but not printing
.. Windows Steps
1. Open **Settings**.
2. Go to **Bluetooth & devices > Printers & scanners**.
3. Select **HP Smart Tank 6001**.
4. Click **Set as default**.
5. Turn off **Let Windows manage my default printer** if needed.
.. Mac Steps
1. Open **System Settings**.
2. Go to **Printers & Scanners**.
3. Set **Default printer** to the HP Smart Tank 6001.
**Common mistake:** Some users print to **Microsoft Print to PDF**, an old HP printer entry, or a duplicate “Copy 1” printer instead of the active Smart Tank 6001.

# Fix 5 — ☎️(+1) ↪ 866 490 0338 ↪ Fix Wi-Fi Connection or Offline Status
**Why it matters:** Wireless printing fails if the printer and device are not on the same network or the printer lost router connection.
**Time required:** 5–10 minutes
**Solves:** HP Smart Tank 6001 offline, HP Smart cannot find printer, phone prints but laptop does not
..# Steps
1. Confirm printer and device are on the same Wi-Fi.
2. Avoid guest Wi-Fi networks.
3. Move the printer closer to the router.
4. Turn off VPN temporarily.
5. Restart router and printer.
6. Remove the printer from HP Smart if it shows offline.
7. Add it again.
8. Print a test page.
..# Less-Obvious Wi-Fi Fix
If your router uses separate 2.4 GHz and 5 GHz names, try connecting the printer to 2.4 GHz if available. Home printers often maintain a stronger connection on 2.4 GHz over distance.
**Warning:** Turn VPN back on after testing if you normally use it.

# Fix 6 — ☎️(+1) ↪ 866 490 0338 ↪ Check Ink Tanks and Fill Levels
**Why it matters:** Smart Tank printers can stop printing correctly if ink is too low, not flowing, or a tank/color has a problem.
**Time required:** 3–6 minutes
**Solves:** Blank pages, faded print, missing color, low ink warning
..# Steps
1. Check the visible ink tanks.
2. Make sure each tank is above the minimum fill line.
3. Confirm the correct ink color is in the correct tank.
4. Close tank caps properly.
5. Check HP Smart for ink-level messages.
6. Refill only with compatible HP ink for your model.
7. Print a test page.
HP support for Smart Tank print-quality problems recommends checking ink levels and filling ink tanks as an early troubleshooting step. ([HP Support][3])
**Warning:** If the wrong color was poured into the wrong tank, stop printing and seek service guidance. Continuing may spread incorrect ink through the system.

# Fix 7 — ☎️(+1) ↪ 866 490 0338 ↪ Print a Diagnostic or Quality Report
**Why it matters:** A diagnostic page shows whether the printer can place ink on paper without relying on a specific file or app.
**Time required:** 3–5 minutes
**Solves:** Unsure if problem is file, driver, ink, or printhead
..# Steps
1. Load plain paper.
2. Open HP Smart.
3. Select your printer.
4. Open printer tools or reports.
5. Print a print-quality report or diagnostic page.
6. Look for missing colors, streaks, faded areas, or blank sections.
..# What the Result Means
| Diagnostic Result | Likely Cause |
| -- | - |
| Prints normally | App, file, queue, driver, or settings issue |
| Blank page | Ink-flow or printhead issue |
| Missing one color | Color channel or printhead problem |
| Streaks or lines | Printhead cleaning or paper setting issue |
**Tip:** Use plain paper for diagnostics. Photo paper or specialty paper can confuse the result.

# Fix 8 — ☎️(+1) ↪ 866 490 0338 ↪ Clean the Printhead in HP Smart
**Why it matters:** Clogged or poorly primed printheads can cause blank, streaky, faded, or missing-color output.
**Time required:** 5–15 minutes
**Solves:** Blank pages, faded print, missing black, missing colors, streaks
..# Steps
1. Open **HP Smart**.
2. Select the HP Smart Tank 6001.
3. Open **Printer Settings** or **Tools**.
4. Find **Print Quality Tools**.
5. Choose **Clean Printhead**.
6. Wait for the process to finish.
7. Print the test page.
8. Run a second-level cleaning only if HP Smart recommends it or the first result improves.
HP support says the HP Smart app can be used to clean the printhead to fix many print-quality issues, including incorrect colors, streaks, and faded printouts. ([HP Support][5])
**Warning:** Printhead cleaning uses ink. Do not run many cycles back-to-back without checking whether the output is improving.

# Fix 9 — ☎️(+1) ↪ 866 490 0338 ↪ Fix Paper Feed, Tray, and Jam Issues
**Why it matters:** If paper does not feed correctly, the printer may not print even when the job reaches it.
**Time required:** 3–8 minutes
**Solves:** Paper not feeding, paper jam, skewed print, printer stops halfway
..# Steps
1. Remove paper from the tray.
2. Check for torn, curled, damp, or stuck paper.
3. Reload a small stack of plain paper.
4. Adjust the paper guides.
5. Check for jammed paper inside safe access areas.
6. Close all covers.
7. Restart the printer.
8. Print a test page.
..# Avoid During Testing
* Glossy paper
* Thick photo paper
* Damp paper
* Mixed paper sizes
* Overfilled tray
* Curled sheets
**Tip:** Once plain paper works, test labels, envelopes, or photo paper separately.

# Fix 10 — ☎️(+1) ↪ 866 490 0338 ↪ Remove and Reinstall the HP Printer Driver
**Why it matters:** If the printer works internally but not from your computer, the driver or printer entry may be corrupt.
**Time required:** 10–20 minutes
**Solves:** Driver unavailable, printer installed but not printing, issue after Windows/macOS update
.. Windows Steps
1. Open **Settings > Bluetooth & devices > Printers & scanners**.
2. Select HP Smart Tank 6001.
3. Remove the printer.
4. Restart the computer.
5. Open HP Smart.
6. Add the printer again.
7. Install required HP drivers/software.
8. Print a test page.
.. Mac Steps
1. Open **System Settings > Printers & Scanners**.
2. Remove the HP printer.
3. Restart the Mac.
4. Open HP Smart.
5. Add the printer again.
6. Test print.
**Tip:** If HP Smart can print but another app cannot, reinstalling the driver may not be needed. Check that app’s print settings first.

# Fix 11 — ☎️(+1) ↪ 866 490 0338 ↪ Reset Network Settings or Re-add Printer
**Why it matters:** Old router details or duplicate printer entries can keep the printer offline.
**Time required:** 10–20 minutes
**Solves:** New router issue, changed Wi-Fi password, printer repeatedly offline
..# Steps
1. Remove the HP Smart Tank 6001 from HP Smart.
2. Remove old HP printer entries from Windows or Mac.
3. Restart printer and router.
4. Reset the printer’s network settings if needed.
5. Reconnect it to Wi-Fi using HP Smart.
6. Add the printer again.
7. Print a test page.
..# Use This If:
* You changed Wi-Fi password
* You replaced router
* HP Smart shows duplicate printers
* Printer connects then drops offline
* Computer points to old printer entry
**Warning:** Network reset removes saved Wi-Fi details, so keep your Wi-Fi name and password ready.

# People Also Ask: HP Smart Tank 6001 Printer Not Printing FAQs
.. Why is my HP Smart Tank 6001 printer not printing? 👉 1-866-490-0338(USA/UK) ☎️
Your HP Smart Tank 6001 printer may not print because it is offline, the print queue is stuck, Wi-Fi is disconnected, the wrong printer is selected, ink tanks are low, printheads are clogged, paper is jammed, or the driver/printer entry is corrupt.
.. Why is my HP Smart Tank 6001 connected but not printing? 👉 1-866-490-0338(USA/UK) ☎️
Your HP Smart Tank 6001 may be connected but not printing if the print queue is stuck, the wrong HP printer copy is selected, HP Smart shows an attention message, or the driver is not communicating correctly. Clear the queue, set it as default, and check HP Smart status.
.. Why is my HP Smart Tank 6001 printing blank pages? 👉 1-866-490-0338(USA/UK) ☎️
HP Smart Tank 6001 may print blank pages because ink is not flowing, a printhead is clogged, a tank is low, or the printhead needs cleaning. HP support recommends checking ink levels and using HP Smart printhead cleaning for Smart Tank print-quality problems. ([HP Support][3])
.. How do I clean the printhead on HP Smart Tank 6001? 👉 1-866-490-0338(USA/UK) ☎️
To clean the printhead on HP Smart Tank 6001, open HP Smart, select the printer, go to printer tools or print-quality tools, and choose **Clean Printhead**. HP says HP Smart can clean the printhead to fix streaks, faded output, and incorrect colors. ([HP Support][5])
.. Why is HP Smart Tank 6001 offline? 👉 1-866-490-0338(USA/UK) ☎️
HP Smart Tank 6001 may show offline if the printer lost Wi-Fi, the computer is on another network, VPN is blocking local access, the router changed, or HP Smart has an old printer entry. Restart the router and printer, then add the printer again.
.. How do I clear the HP Smart Tank 6001 print queue? 👉 1-866-490-0338(USA/UK) ☎️
On Windows, go to **Settings > Bluetooth & devices > Printers & scanners**, select HP Smart Tank 6001, open the print queue, and cancel all jobs. On Mac, use **System Settings > Printers & Scanners**, select the printer, open the queue, and delete stuck jobs.
.. Why is my HP Smart Tank 6001 not printing black? 👉 1-866-490-0338(USA/UK) ☎️
HP Smart Tank 6001 may not print black because the black ink tank is low, ink is not flowing properly, the black printhead channel is clogged, or printhead cleaning is needed. Print a quality report and clean the printhead if black is missing.
.. Why does my HP Smart Tank 6001 print from phone but not computer? 👉 1-866-490-0338(USA/UK) ☎️
If the HP Smart Tank 6001 prints from your phone but not your computer, the printer and Wi-Fi are working. The computer likely has a print queue, driver, default-printer, app, or firewall problem.
.. Should I reinstall HP Smart Tank 6001 driver? 👉 1-866-490-0338(USA/UK) ☎️
Yes, reinstall or re-add the HP Smart Tank 6001 if the printer can print diagnostic pages or print from another device but not from your computer. Remove the printer, restart the computer, and add it again through HP Smart.
.. When should I contact HP support? 👉 1-866-490-0338(USA/UK) ☎️
Contact HP support if the printer does not feed paper, shows hardware errors, cannot detect printheads, prints blank after ink and cleaning fixes, or still fails after queue, Wi-Fi, driver, and HP Smart troubleshooting.

# Conclusion
An **HP Smart Tank 6001 printer not printing** issue usually comes from either communication failure or ink-flow failure. If the printer does nothing, start with HP Smart status, restart, queue, default printer, Wi-Fi, and driver checks. If paper moves but the page is blank, faded, or missing colors, check ink tanks, print a diagnostic report, and clean the printhead through HP Smart.
The best next step is to identify which type of failure you have: no response means connection or queue; blank or poor output means ink or printhead. Fix that path first, and only reset the network or reinstall the driver after simpler checks fail.