Brother Printer Not Working After Update?? 11 Fixes That Actually Help

Brother printer not working after update? 👉 1-866-490-0338(USA/UK) ☎️

# Brother Printer Not Working After Update? 👉 1-866-490-0338(USA/UK) ☎️
Your Brother printer worked fine yesterday. Then Windows updated, macOS updated, the printer firmware changed, or your router settings were refreshed — ☎️(+1) ↪ 866 490 0338 ↪ and now the printer will not print. It may show **offline**, **driver unavailable**, **printer not responding**, **scanner not found**, or print jobs may stay stuck in the queue.
This is a common problem. A **Brother printer not working after update** issue usually happens because the update changed printer drivers, reset network settings, replaced the printer port, paused the print queue, blocked printer discovery, or made older Brother software incompatible.
The good news is that most post-update Brother printer problems can be fixed without replacing the printer. Start with the quick checks, then move through driver, queue, Wi-Fi, and system-level fixes in order.

To fix a Brother printer not working after update, restart the printer and computer, clear the print queue, turn off offline mode, set Brother as default printer, reinstall the latest Brother driver, restart the Windows Print Spooler, reconnect Wi-Fi, remove duplicate printer entries, add the printer by IP address, and update Brother software or firmware if needed.

.. Quick Check After an Update
Before reinstalling everything, check these basics:
* Restart the computer after the update.
* Restart the Brother printer.
* Check the printer display for errors.
* Confirm paper, ink, toner, and covers are okay.
* Make sure printer and computer are on the same Wi-Fi.
* Clear old print jobs.
* Check if Windows or macOS added a duplicate printer.
* Check whether the printer is set as default.
* Confirm scanner issue and printer issue separately.
* Note whether the update was Windows, macOS, router, driver, or firmware.
If the printer can print its own test page, the hardware is likely fine. The issue is probably driver, queue, or network related.

# Fix 1 — ☎️(+1) ↪ 866 490 0338 ↪ Restart Everything After the Update
**Why this matters:** Updates often need a full restart to reload printer services, drivers, and network connections.
**Time required:** 3–5 minutes
**Solves:** Printer not responding, temporary driver issue, offline after update
..# Steps
1. Turn off the Brother printer.
2. Unplug the printer power cable.
3. Restart your computer.
4. Restart your Wi-Fi router if using wireless printing.
5. Wait 60 seconds.
6. Plug the printer back in.
7. Turn it on.
8. Try printing a test page.
..# Tip
If Windows shows **Update and restart**, choose that option before troubleshooting the printer.

# Fix 2 — ☎️(+1) ↪ 866 490 0338 ↪ Clear Old Print Jobs
**Why this matters:** Print jobs sent before or during the update may become stuck and block new jobs.
**Time required:** 2–5 minutes
**Solves:** Print queue stuck, printer says printing but nothing happens, jobs frozen after update
.. Windows Steps
1. Open **Settings**.
2. Go to **Bluetooth & devices → Printers & scanners**.
3. Select your Brother printer.
4. Click **Open print queue**.
5. Cancel all pending jobs.
6. Restart the printer.
7. Try printing again.
.. Mac Steps
1. Open **System Settings → Printers & Scanners**.
2. Select the Brother printer.
3. Open the queue.
4. Delete stuck jobs.
5. Try printing again.
..# Tip
After major updates, test with a simple text document before printing large PDFs or images.

# Fix 3 — ☎️(+1) ↪ 866 490 0338 ↪ Turn Off Offline Mode
**Why this matters:** Windows may mark the printer offline after updates even when the printer is available.
**Time required:** 2–3 minutes
**Solves:** Brother printer offline after Windows update, printer unavailable, paused printing
..# Windows Steps
1. Open **Settings → Bluetooth & devices → Printers & scanners**.
2. Select your Brother printer.
3. Click **Open print queue**.
4. Click **Printer** from the menu if visible.
5. Uncheck **Use Printer Offline**.
6. Uncheck **Pause Printing**.
7. Close the queue.
8. Print again.
..# Tip
If offline mode turns on again, remove and re-add the printer or add it by IP address.

# Fix 4 — ☎️(+1) ↪ 866 490 0338 ↪ Set the Correct Brother Printer as Default
**Why this matters:** Updates can create duplicate printer entries or switch your default printer to PDF, Fax, or another old device.
**Time required:** 2 minutes
**Solves:** Job goes to wrong printer, print command disappears, duplicate printer after update
..# Windows Steps
1. Open **Settings → Bluetooth & devices → Printers & scanners**.
2. Turn off **Let Windows manage my default printer** if needed.
3. Select your working Brother printer.
4. Click **Set as default**.
5. Remove duplicate Brother entries that show offline.
..# Mac Steps
1. Open **System Settings → Printers & Scanners**.
2. Choose your Brother printer under default printer.
3. Remove old unavailable entries if needed.
..# Tip
Do not select **Brother Fax** for normal printing. Choose the main printer entry.

# Fix 5 — ☎️(+1) ↪ 866 490 0338 ↪ Restart Windows Print Spooler
**Why this matters:** Windows updates can leave the Print Spooler service stuck. This stops all printers from working correctly.
**Time required:** 3–5 minutes
**Solves:** Queue frozen, printer not receiving jobs, all printers stopped after update
..# Steps
1. Press **Windows + R**.
2. Type `services.msc`.
3. Press **Enter**.
4. Find **Print Spooler**.
5. Right-click it.
6. Select **Restart**.
7. Clear the Brother print queue.
8. Try printing again.
..# If Jobs Still Will Not Clear
1. Stop **Print Spooler**.
2. Open:
```text
C:\Windows\System32\spool\PRINTERS
```
3. Delete stuck files inside the folder.
4. Start **Print Spooler** again.
5. Restart the computer.
..# Warning
Delete only files inside the PRINTERS folder, not the folder itself.

# Fix 6 — ☎️(+1) ↪ 866 490 0338 ↪ Reinstall the Latest Brother Driver
**Why this matters:** Updates can replace or break printer drivers. A fresh Brother driver restores proper communication.
**Time required:** 10–20 minutes
**Solves:** Driver unavailable, printer not detected, scanner not working, missing features
..# Windows Steps
1. Open **Settings → Bluetooth & devices → Printers & scanners**.
2. Remove the Brother printer.
3. Restart your PC.
4. Visit Brother’s official support website.
5. Search your exact printer model.
6. Download the latest full driver package.
7. Run the installer.
8. Choose USB or wireless setup.
9. Finish installation.
10. Print a test page.
..# Mac Steps
1. Open **System Settings → Printers & Scanners**.
2. Remove the Brother printer.
3. Restart your Mac.
4. Add the printer again.
5. Use Brother driver or AirPrint if available.
6. Install Brother software if scanning features are missing.
..# Tip
Always search with the full model number, such as HL-L2350DW, DCP-L2541DW, MFC-L2710DW, DCP-T520W, or your exact model.

# Fix 7 — ☎️(+1) ↪ 866 490 0338 ↪ Remove Duplicate Brother Printer Entries
**Why this matters:** After updates, your computer may show multiple Brother printer copies, and the active one may not be selected.
**Time required:** 3–5 minutes
**Solves:** Wrong printer selected, offline duplicate, print job stuck in old entry
..# Steps
1. Open **Printers & scanners**.
2. Look for duplicate Brother entries.
3. Identify the one that is online or recently added.
4. Remove old offline copies.
5. Keep the correct Brother printer.
6. Set it as default.
7. Test printing.
..# Tip
If you are unsure which entry is correct, remove all Brother entries and reinstall the printer cleanly.

# Fix 8 — ☎️(+1) ↪ 866 490 0338 ↪ Reconnect Brother Printer to Wi-Fi
**Why this matters:** Router or system updates can change network settings, causing the printer and computer to lose communication.
**Time required:** 5–10 minutes
**Solves:** Wireless printer not working after update, printer not found, offline after router update
..# Steps
1. Press **Menu** or **Settings** on the Brother printer.
2. Go to **Network → WLAN**.
3. Select **Setup Wizard**.
4. Choose your Wi-Fi network.
5. Enter the Wi-Fi password.
6. Wait for connection confirmation.
7. Restart your computer.
8. Add the printer again if needed.
..# Wi-Fi Checks
* Use the same Wi-Fi on computer and printer.
* Avoid guest Wi-Fi.
* Move printer closer to router.
* Try 2.4 GHz Wi-Fi if setup fails.
* Turn off VPN while testing.
..# Tip
If your router updated and changed security settings, reconnecting the printer often fixes the issue.

# Fix 9 — ☎️(+1) ↪ 866 490 0338 ↪ Add the Brother Printer by IP Address
**Why this matters:** Updates can break automatic printer discovery. Adding by IP creates a more direct network path.
**Time required:** 7–10 minutes
**Solves:** Printer not found after update, keeps going offline, network detection failure
..# Step 1: ☎️(+1↳866≪490≫0338) Find Printer IP Address
1. Open the printer menu.
2. Go to **Network**.
3. Open **WLAN Status**, **TCP/IP**, or **Network Configuration**.
4. Write down the IPv4 address.
..# Step 2: ☎️ 1➜866((490))➜0338 Add by IP on Windows
1. Open **Settings → Bluetooth & devices → Printers & scanners**.
2. Click **Add device**.
3. Click **Add manually**.
4. Select **Add a printer using an IP address or hostname**.
5. Enter the Brother printer IP address.
6. Select the Brother driver.
7. Complete setup.
8. Print a test page.
..# Tip
If adding by IP fixes the issue, reserve that IP address in your router to prevent future offline problems.

# Fix 10 — ☎️(+1) ↪ 866 490 0338 ↪ Check Firewall, VPN, or Network Discovery Settings
**Why this matters:** After updates, firewall rules or network profiles may reset and block printer discovery.
**Time required:** 5–10 minutes
**Solves:** Printer works from phone but not PC, network printer not found, scanner not detected
..# Steps
1. Turn off VPN temporarily.
2. Make sure your network is set as trusted/private on Windows.
3. Allow printer sharing or local network access if prompted.
4. Check firewall settings if printer discovery is blocked.
5. Try printing from another device.
6. Re-add the Brother printer.
..# Windows Network Profile Check
1. Open **Settings → Network & Internet**.
2. Select your Wi-Fi or Ethernet.
3. Set network profile to **Private** if it is your trusted home or office network.
4. Try printer discovery again.
..# Warning
Use **Private** only on trusted networks. Keep public Wi-Fi as public.

# Fix 11 — ☎️(+1) ↪ 866 490 0338 ↪ Update Brother Firmware or Software Carefully
**Why this matters:** Some update-related issues are fixed by Brother firmware or utility updates, but firmware should be handled carefully.
**Time required:** 10–20 minutes
**Solves:** Compatibility issue after OS update, repeated printer errors, utility not working
..# Steps
1. Go to Brother’s official support page.
2. Search your exact printer model.
3. Check for firmware or software updates.
4. Read the instructions carefully.
5. Keep printer powered on during update.
6. Do not disconnect USB, Ethernet, or Wi-Fi during firmware update.
7. Restart printer after completion.
..# Warning
Do not interrupt firmware updates. Turning off the printer during firmware update can cause serious errors.

.. Less-Obvious Fix 〖 ☎️⭐+1-(866)-490-0338 〗: Check Scanner Separately From Printer
After an update, printing and scanning can break for different reasons.
**Why this matters:** Your Brother printer may print but not scan, or scan but not print. These are separate software paths.
**Time required:** 5–10 minutes
**Solves:** Brother scanner not working after update, printer works but scanner missing
..# Steps
1. Test printing a page.
2. Test scanning from Brother software.
3. Test scanning from Windows Scan or Mac scanning tools.
4. If printing works but scanning fails, reinstall Brother scanner software.
5. Check firewall permissions.
6. Re-add the printer/scanner device.
..# Tip
For all-in-one Brother printers, install the full driver and software package if scanning features disappeared after update.

.. Common Brother Post-Update Problems
| Problem After Update | Likely Cause | Best Fix |
| | | |
| Printer offline | Network/port reset | Turn off offline mode |
| Driver unavailable | Driver broken by update | Reinstall Brother driver |
| Queue stuck | Spooler issue | Restart Print Spooler |
| Duplicate printer | New entry created | Remove old entries |
| Wi-Fi not found | Network setting changed | Reconnect Wi-Fi |
| Scanner missing | Scanner driver removed | Install full software |
| Prints from phone, not PC | PC driver/firewall issue | Re-add printer on PC |
| Works by USB, not Wi-Fi | Network discovery issue | Add by IP |
| Error after firmware update | Firmware/settings issue | Restart, check Brother support |

# Brother Printer Not Working After Windows Update
If your Brother printer stopped after a Windows update, use this order:
1. Restart Windows fully.
2. Clear the print queue.
3. Turn off **Use Printer Offline**.
4. Restart Print Spooler.
5. Set Brother as default.
6. Remove duplicate printer entries.
7. Reinstall Brother driver.
8. Add printer by IP address.
9. Check firewall/network profile.
Windows updates often affect drivers, ports, spooler, and default printer settings.

# Brother Printer Not Working After Mac Update
If your Brother printer stopped after a macOS update, use this order:
1. Restart Mac and printer.
2. Clear printer queue.
3. Remove and re-add the printer.
4. Try AirPrint if Brother driver is unavailable.
5. Install Brother’s latest software if supported.
6. Check scanner permissions if scanning stopped.
7. Update macOS again if a patch is available.
Mac updates can change printer driver support, permissions, or scanner compatibility.

# People Also Ask FAQs
.. Why is my Brother printer not working after update? 👉 1-866-490-0338(USA/UK) ☎️
Your Brother printer may not work after an update because the printer driver changed, the print queue froze, the printer was set offline, the default printer changed, Wi-Fi discovery broke, or firewall settings reset. Start by restarting the printer and computer, clearing the queue, and turning off offline mode.
If the issue continues, reinstall the Brother driver.

.. How do I fix Brother printer after Windows update? 👉 1-866-490-0338(USA/UK) ☎️
To fix a Brother printer after Windows update, restart the PC, clear the print queue, restart the Print Spooler, uncheck **Use Printer Offline**, set Brother as default, remove duplicate printer entries, and reinstall the latest Brother driver from the official Brother support site.
If wireless printing fails, add the printer by IP address.

.. Why does Windows say Brother driver unavailable after update? 👉 1-866-490-0338(USA/UK) ☎️
Windows may say Brother driver unavailable after an update because the old driver became incompatible, was removed, or was replaced by a basic driver. Remove the printer, restart the PC, and install the latest full Brother driver package.
Use the exact Brother model number when downloading.

.. Why is my Brother printer offline after update? 👉 1-866-490-0338(USA/UK) ☎️
Your Brother printer may show offline after update because Windows changed the printer port, enabled offline mode, reset network discovery, or lost the printer’s IP address. Turn off **Use Printer Offline**, restart the router, and re-add the printer.
Adding by IP can stop repeated offline issues.

.. How do I reinstall Brother printer driver after update? 👉 1-866-490-0338(USA/UK) ☎️
To reinstall the Brother printer driver after update, remove the printer from **Printers & scanners**, restart your computer, download the full driver package from Brother’s official support website, run the installer, choose USB or wireless setup, and print a test page.
Do not use random third-party driver tools.

.. Why is my Brother scanner not working after update? 👉 1-866-490-0338(USA/UK) ☎️
Your Brother scanner may not work after update because scanner drivers, permissions, or firewall rules changed. Printing and scanning use different software components, so the printer may still print while scanning fails.
Install Brother’s full driver and scanner software package.

.. Why does my Brother printer work from phone but not computer after update? 👉 1-866-490-0338(USA/UK) ☎️
If your Brother printer works from phone but not computer after update, the printer and Wi-Fi are likely fine. The computer probably has a driver, queue, firewall, default printer, or offline setting problem.
Remove and re-add the printer on the computer.

.. Can a router update stop Brother printer from working? 👉 1-866-490-0338(USA/UK) ☎️
Yes, a router update can stop a Brother printer from working if Wi-Fi settings, security mode, network name, password, or IP assignment changed. Reconnect the printer to Wi-Fi and restart the router.
If the IP address keeps changing, reserve it in router settings.

.. Should I update Brother firmware after an OS update? 👉 1-866-490-0338(USA/UK) ☎️
You may update Brother firmware if Brother recommends it for your model or if the printer has repeated compatibility errors. However, firmware updates should be done carefully and only from Brother’s official support page.
Do not turn off the printer during firmware updates.

.. What should I do if Brother printer still does not work after reinstalling driver? 👉 1-866-490-0338(USA/UK) ☎️
If the Brother printer still does not work after reinstalling the driver, test the printer’s own report page, check Wi-Fi connection, add the printer by IP address, disable VPN temporarily, and check firewall/network discovery settings.
If the printer cannot print its own report, check hardware warnings, toner, paper, or drum issues.

# Conclusion
A **Brother printer not working after update** problem usually comes from changed drivers, offline mode, stuck print queue, Print Spooler failure, duplicate printer entries, Wi-Fi changes, firewall resets, or scanner software compatibility issues.
Start with quick recovery steps: restart everything, clear the queue, turn off offline mode, and set Brother as the default printer. If that fails, reinstall the latest Brother driver, reconnect Wi-Fi, add the printer by IP address, and check firewall or network discovery settings.
If the printer can print its own test page, the hardware is probably fine. Focus on computer, driver, or network settings first.